The next step consists in making urethane rubber and pouring it into the silicone mold. This is the tricky part...
The next step consists in making urethane rubber and pouring it into the silicone mold. This is the tricky part...
For this step you will need:
For this step you will need:
* Parts A and B of your chosen `Clear Flex' product.
* green `So Strong' dye.
* Parts A and B of your chosen 'Clear Flex' product.
* a cup and a tool to mix the urethane. It is highly suggested you use disposable cups because cleaning the clear flex residue is very difficult.
* green 'So Strong' dye.
* your silicone mold.
* a cup and a tool to mix the urethane. It is highly suggested you use disposable cups because cleaning the clear flex residue is very difficult.
* a syringe (or micropipette).
* your silicone mold.
* a scale. You can also use anything to measure volumes.
* a syringe (or micropipette).
* protection gloves.
* a scale. You can also use anything to measure volumes.
* a vacuum chamber coupled with a vacuum pump going as low as 0.98 bar (9 inches of mercury).
* protection gloves.
* a piece of fishing wire or any very thin wire.
* a vacuum chamber coupled with a vacuum pump going as low as 0.98 bar (9 inches of mercury).
* a piece of fishing wire or any very thin wire.
Here again, you can find all the safety and processing recommendations for Clear Flex [here](https://www.smooth-on.com/tb/files/CLEAR_FLEX_30_TB.pdf). Remember to check this first.
Here again, you can find all the safety and processing recommendations for Clear Flex [here](https://www.smooth-on.com/tb/files/CLEAR_FLEX_30_TB.pdf). Remember to check this first.
